<label id="zmolu"></label>
    1. <s id="zmolu"></s><label id="zmolu"></label>

      Precautions for mold maintenance
      協(xié)信模具保養

             In order to effectively maintain the precision of the mold, extend its service life, stabilize the production operation, ensure the quality of the molded products, and reduce the occurrence of faults in the production process, the company provides a mold maintenance reference scheme for customers' reference. This scheme is applicable to all mold maintenance.

      Specific content:

      1. Mold maintenance is divided into daily inspection and maintenance and regular maintenance in the production process.

      2. For daily maintenance, the mold maintainer shall regularly inspect the molds in production and make maintenance records.

      3. The regular maintenance takes the mold from the mold to the end of the production order as a cycle, and the mold maintainer will maintain the mold and make maintenance records.

      Items of mold maintenance and inspection:

      1. Whether the guide post and guide sleeve are well lubricated.

      2. Whether the mold surface is free of residual debris and dirt.

      3. Whether the inclined guide post is well lubricated.

      4. Whether the sliding block and chute are well lubricated.

      5. Whether the ejector pin spring is in good condition, and whether the ejector pin is accurately reset and lubricated.

      6. Whether the mold opener bolts are loose and whether the mold pressing plate bolts are not loose.

      7. Whether the opening and closing mold is normal and whether the ejection is abnormal.

      8. Whether the surface of the cavity is clean and free of accumulated material, foreign matter and rust inhibitor.

      9. Check whether the drain hole and exhaust slot are blocked.

      Regular maintenance

      1. Clean the guide post and guide sleeve and apply lubricating oil.

      2. Clean up the dust and oil on the mold surface and the residual scraps and dirt on the parting surface.

      3. Confirm that the ejector pin spring is in good condition, and the ejector pin can be accurately reset and lubricated.

      4. The mold opener bolts are not loose.

      5. The surface of the cavity shall be cleaned and free of accumulated materials and guide objects, and the antirust agent shall be applied.

      6. The exhaust hole and exhaust slot shall be cleaned without blockage.

      7. Wipe the periphery of the mold with a rag, and there is no water or rust agent.

      8. Anti rust treatment of the mold. After production for more than 6 months, replace the anti rust agent with butter to ensure the long-term storage of the mold.

      9. Make the corresponding mold maintenance record log.

      成人久久18免费网址,a毛片在线观看,成年女人毛片免费播放人,亚洲综合中文网 滁州市| 岚皋县| 长治市| 饶阳县| 宜宾县| 临夏县| 泽库县| 富蕴县| 海城市| 金平| 福清市| 黄山市| 邓州市| 墨脱县| 桓台县| 临城县| 碌曲县| 拉孜县| 韩城市| 北碚区| 宿州市| 澜沧| 磐安县| 玛沁县| 叶城县| 齐河县| 无棣县| 新丰县| 习水县| 都匀市| 项城市| 浦北县| 体育| 浑源县| 夹江县| 共和县| 武鸣县| 四川省| 双柏县| 通许县| 乐安县| http://444 http://444 http://444 http://444 http://444 http://444